Jos tuotetta on varastossa Tampereella, se tulee noutaa Tampereelta . Yksittäisen kanisterin kuljetusmahdollisuutta Suomen sisällä ei enää ole. Laattarahdin mukana kuljetus on mahdollinen. Kysy lisää eri vaihtoehdoista. info@viinikantahti.com

Losefix is a very powerful dissolver for heavy pollution on cement tiles or natural stone such as paint, glue residues (other than tile glue), old impregnation layers, chewing gum and many other products that are soluble by a product with solvents. Losefix you use when old impregnation layers need to be removed to get to underlying dirt, when renovating an old cement tile floor, for removing oil, paint, carpet glue and stains that have settled on or in the tiles.

Always close the container. This product contains solvents. If the product is left open for too long, this will adversely affect the product’s performance! After opening, this product has a shelf life of 1 year in a cool dry place.
Note: after using Losefix, the protective impregnation layer is removed and the tiles will have to be re-impregnated.
Losefix is a solvent and can be harmful to your health. Therefore keep it away from children and apply it in a well-ventilated area with gloves and eye protection!

How do I use Losefix?
Shake the bottle before use. Losefix should not be diluted with water and should be used pure. Treat the soiled tiles by applying a generous layer of Losefix with a roller or brush. Allow this layer to work in for at least 30 seconds but do not let it dry. It is then advisable to use a stiff scrubbing brush to scrub the tiles vigorously. Rinse the floor with clean tap water. If necessary, repeat this step.

It often happens that the stains are embedded in the tiles. This means that Losefix is not sufficient to remove the stain. In such a case, it is important to clean the tiles our Superboen after using Losefix. For removing stains with Superboen, read the instructions. If in doubt, consult our helpdesk! You can find the complete treatment schedule for cement tiles on our website.

Suitable for
Losefix is suitable for porous tiles such as cement tiles or natural stone.